Parameter substantiation of supra bit jet pump for productive formation opening
https://doi.org/10.21285/2686-9993-2021-44-4-433-440
Abstract
The purpose of the study is to develop a supra bit jet pump taking into account the unsteadiness of low-speed drilling for crushing the cuttings injected from the annular space under productive formation opening. The article proposes a device for drill string bottom assembly intended for the initial opening of the productive formation. The device includes a supra bit jet pump and a colmatator. The jet pump creates an additional circulation loop of the drilling fluid above the well bottom, crushes the cuttings injected from the annular space in the mixing chamber and delivers it to the colmatator. An additional circulation loop above the well bottom creates a local drawdown of the formation while maintaining the hydrostatic pressure in the well. Crushing of cuttings in the mixing chamber of the jet pump occurs due to the creation of cross flows in the jet pump. The cross flows are provided due to the angular and eccentric displacement of the working nozzle of the jet pump relative to the mixing chamber. The colmatator creates an impermeable screen on the borehole wall for temporary isolation of the productive formation under initial opening. The conducted study allowed the authors to propose head characteristics of the jet pump taking into account the angular, eccentric displacement of the working nozzle. The head characteristic of the jet pump has been developed for the unsteady operation of the jet pump in the drill string bottom assembly. The head characteristics take into account the roughness of the flow path of the jet pump. Using the head characteristics, the permissible displacements of the working nozzle of the jet pump have been determined. Recommendations for the design of jet pumps for drill string bottom assemblies are proposed.
About the Authors
A. P. Melnikov
Geological Prospecting College, Irkutsk National Research Technical University
Russian Federation
Competing Interests:
Russian Federation
Alexander P. Melnikov, Lecturer
Irkutsk
Competing Interests:
The authors declare no conflicts of interests.
N. A. Buglov
Irkutsk National Research Technical University
Russian Federation
Competing Interests:
Russian Federation
Nikolay A. Buglov, Cand. Sci. (Eng.), Associate Professor, Head of the Department of Oil and Gas Business, Institute of Subsurface Resource Management
Irkutsk
Competing Interests:
The authors declare no conflicts of interests.
References
1. Okoro E. E., Obomanu T., Sanni S. E., Olatunji D. I., Igbinedion P. Application of artificial intelligence in predicting the dynamics of bottom hole pressure for under-balanced drilling: extra tree compared with feed forward neural network model. Petroleum. 2021. https://doi.org/10.1016/j.petlm.2021.03.001.
2. Salehi S., Hareland G., Nygaard R. Numerical simulations of wellbore stability in under-balanced-drilling wells. Journal of Petroleum Science and Engineering. 2010; 72(3-4):229-235. https://doi.org/10.1016/j.petrol.2010.03.022.
3. Mikhal'chenkova A. N., Lagutkin M. G., Baranova E. Yu. Comparative analysis of vortex ejector and jet pump characteristics. Chemical and Petroleum Engineering. 2020;56(7-8):522-528. https://doi.org/10.1007/s10556-020-00827-3.
4. Pugh T., Khelifa C. B., Fraser K. First ever sub-sea hydraulic jet pump system used to optimize single well development offshore Tunisia. In: Offshore Mediterranean Conference and Exhibition. Ravenna; 2015. Available from: https://www.onepetro.org/download/conference-paper/OMC-2015-207?id=conference-paper%2FOMC-2015-207 [Accessed 20th August 2021].
5. Sokolov E. Ya., Zinger N. M. Jet devices. Moscow: Energoatomizdat; 1989. 325 p. (In Russ.).
6. Sazonov Yu. A., Mokhov M. A., Gryaznova I. V., Tumanyan K. A., Pyatibratov P. V., Voronova V. V. Development and research of jet pump-compressor unit with periodical connection of ejector. Journal of Applied Engineering Science. 2020;18(2):267-272. https://doi.org/10.5937/jaes18-25998.
7. Kalachev V. V. Jet pumps: theory, calculation and design. Moscow: Omega-L; 2017. 418 p. (In Russ.).
8. Shaidakov V. V., Melnikov A. P., Chernova K. V., Korobkov G. E. Efficient drilling-in in the oil and gas wells drilling. SOCAR Proceedings. 2018;4:26-34. (In Russ.). https://doi.org/10.5510/OGP20180400368.
9. Sazonov Yu. A., Mokhov M. A., Gryaznova I. V., Voronova V. V., Tumanyan Kh. A., Frankov M. A., et al. Development of advanced technologies dedicated to ejector systems and mesh turbines. Trudy Rossiiskogo gosudarstvennogo universiteta nefti i gaza imeni I. M. Gubkina = Proceedings of Gubkin Russian State University of Oil and Gas. 2020;4:49-60. (In Russ.). https://doi.org/10.33285/2073-9028-2020-4(301)-49-60.
10. Kryzhanivskyi E. I., Panevnyk D. A. Improving use efficiency above-bit jet pumps. SOCAR Proceedings. 2020;2:112-118. (In Russ.). https://doi.org/10.5510/OGP20200200437.
11. Panevnik A. V., Kontsur I. F., Panevnik D. A. Determination of operating parameters of near-bit ejector assembly. Neftyanoe khozyaistvo. 2018;3:70-73. (In Russ.). https://doi.org/10.24887/0028-2448-2018-3-70-73.
12. Panevnyk D. A., Panevnyk A. V. Investigation of the joint work of a jet and plunger pump with a balancing crank-rod drive. Neftyanoe khozyaistvo. 2020;2:58-61. (In Russ.). https://doi.org/10.24887/0028-2448-2020-2-58-61.
13. Krysin N. I., Krapivina T. N. Increasing drilling rates and well yield. Development and improvement of drilling fluid compositions, technologies and engineering tools of primary and secondary penetration of payout beds. Moscow: Infra-Inzheneriya; 2018. 340 p. (In Russ.).
14. Sazonov Yu. A., Mokhov M. A., Tumanyan Kh. A., Frankov M. A., Azarin K. I. The development of compressor technologies with high presssure ejectors for oil and gas production. Neftyanoe khozyaistvo. 2018;5:78-82. (In Russ.). https://doi.org/10.24887/0028-2448-2018-5-78-82.
15. Aseev E. G., Shamov N. A., Lyagov A. V., Nazarov S. V., Khalikov K. I., Zinatullina E. Ya. Depression-wave and other means to increase well intake capacity and productivity. In: Proektirovanie i ekspluatatsiya neftegazovogo oborudovaniya: problemy i resheniya: materialy Vserossiiskoi nauchno-tekhnicheskoi konferentsii = Design and operation of oil and gas equipment: problems and solutions: materials of the All-Russian scientific and technical conference. Ufa: Ufa State Petroleum Technological University; 2004. p.8–13. (In Russ.).
16. Anduganov A. A., Lyagov A. V., Agzamov F. A. Developing the design of a hydraulic jet pump for traditional drilling. In: Sovremennye tekhnologii v neftegazovom dele – 2019: sbornik trudov Mezhdunarodnoi nauchnotekhnicheskoi konferentsii = Modern technologies in oil and gas business – 2019: collected works of the International scientific and technical conference. Ufa: Ufa State Petroleum Technological University; 2019. p.15–19. (In Russ.).
17. Kasimov D. L., Lyagov A. V. Modernized assembly the drill string bottom. In: 70-ya nauchno-tekhnicheskaya konferentsiya studentov, aspirantov i molodykh uchenykh: sbornik tezisov = 70th scientific and technical conference of students, postgraduate students and young scientists: collected abstracts. In 2 vol. Vol. 1. Ufa: Ufa State Petroleum Technological University; 2019. p.97–98. (In Russ.).
18. Mel'nikov A. P., Buglov N. A., Ivanishin V. M., Akchurin R. Kh. A device for drilling wells. Patent RF, no. 186817; 2019. (In Russ.).
19. Melnikov A. P., Buglov N. A. Studying the influence of working nozzle eccentric and angular misalignment in the jet pump on its operation at drilling wells. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2016; 6:50-57. (In Russ.). https://doi.org/10.21285/1814-3520-2016-6-50-57.
20. Melnikov A. P., Buglov N. A. Effect of wet end roughness on jet pump characteristics. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta = Proceedings of Irkutsk State Technical University. 2018;22;1:23-29. (In Russ.). https://doi.org/10.21285/1814-3520-2018-1-23-29.
21. Melnikov A. P., Shaidakov V. V., Syomin V. I. Jet pump operation in a bottom hole’s non-stationary conditions when drilling oil and gas wells. Stroitel'stvo neftyanykh i gazovykh skvazhin na sushe i na more. 2018;12s:30-35. (In Russ.). https://doi.org/10.30713/0130-3872-2018-12s30-35.
Review
For citations:
Melnikov A.P., Buglov N.A. Parameter substantiation of supra bit jet pump for productive formation opening. Earth sciences and subsoil use. 2021;44(4):433-440. (In Russ.) https://doi.org/10.21285/2686-9993-2021-44-4-433-440
Views:
384
Email this article 
Post a Comment 
